Punch Unit Specifications - Sharp AR-FN8 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
B.

Punch unit specifications

1. Basic specifications
a. General
Installation type
Number of
2-hole (Ø6.5)
punch holes and
2-hole/3-hole
hole dia.
auto selection
* For details of
(Ø8.0)
punch positions,
4-hole (Ø6.5)
refer to the next
page. 4-hole (Ø6.5)
Punch position adjustment
Allowable 2-hole
punch size
2-hole/3-hole
auto selection
4-hole (F)
4-hole (S)
Punch dust full detection
Allowable weight for punch
Punch life
Display section
Operation panel
1-10
Field option
Japan, Europe
North America
France (80mm pitch)
Sweden (70, 21mm pitch)
Punch hole pitch is fixed.
Punch position adjustment in the back and forth direction is
provided.
A3 long, B4 long, A4 (long/short), B5 (long/short), FOLIO,
LD long, LG long, LT (long/short), COMPUTER
A3 long, A4 short, LD long, LT short (3-hole), LG long, LT
long, COMPUTER (2-hole)
A3 long, A4 short, LD long, LT short
A3 long, B4 long, A4 (long/short), B5 (long/short), FOLIO,
LD long, LG long, LT (long/short), COMPUTER
Available
* Punch dust full and jam are displayed on the copier display.
64 - 200g (OHP sheet or special paper cannot be used.)
1 million sheets (80g paper)
Not provided.
Not provided
* The punch mode can be set with the operation panel of the
copier.