Supplying The Finisher Unit With Staples - Sharp AR-FN8 Service Manual

6) Return the buffer roller and the buffer roller
cover to their original positions, and close
the upper cover.
Figure 1-306
7) Connect the finisher to the host machine.
Figure 1-307
8) Operate as instructed on the display.
CHAPTER 1 GENERAL DESCRIPTION
B. Supplying the Finisher Unit
with Staples
If the copier indicates the finisher unit staple
supply message, perform the following to sup-
ply it with staples.
1) Open the front door.
Figure 1-308
2) Turn the blue knob counterclockwise.
Figure 1-309
3) Draw out the staple unit, and pull put the
staple cartridge.
Figure 1-310
1-17