Removing The No.1 And No.2 Paper Deflecting Plates - Sharp AR-FN8 Service Manual

7. Removing the No.1 and No.2
Paper Deflecting Plates
1) Remove the rear cover. (See I-A-2.)
2) Remove the lower rear cover. (See II-A-2.)
3) Remove the claw [1] of the No.1 deflect-
ing plate bushing and pull out the No.1 de-
flecting plate shaft [2] toward the rear. (The
procedure is the same for the No.2 paper
deflecting plate.)
4) After detaching the front shaft of the No.1
paper deflecting plate [3] from the front side
plate, remove the No.1 paper deflecting
plate.
CHAPTER 5 MECHANICAL CONSTRUCTION
[1]
Figure 5-233
1
Figure 5-234
[2]
[3]
2
5-31