Table of Contents
Advertisement
I. FEATURES .................................. 1-1
II. SPECIFICATIONS ....................... 1-2
A. Finisher specification ................ 1-2
B. Punch unit specification ......... 1-10
C. Cross Section ......................... 1-13
III. Using the Machine ..................... 1-16
A. Removing Paper Jams
from the Finisher Unit ............. 1-16
B. Supplying the Finisher Unit
with Staples ............................ 1-17
C. Removing Staple Jams from
the Finisher Unit ..................... 1-19
D. Removing Paper Jams from
the Saddle Stitcher Unit
(Saddle Finisher) .................... 1-20
I. BASIC OPERATION .................... 2-1
A. Outline ...................................... 2-1
B. Outline of Electrical
Circuitry .................................... 2-2
C. Inputs to and Outputs from the
Finisher Controller Pcb ........... 2-4
II. FEED/DRIVE SYSTEM ............. 2-10
A. Outline .................................... 2-10
B. Type of Delivery Paths ............ 2-15
C. Feeding and Delivering .......... 2-18
E. Supplying the Saddle Stitcher
Unit with Staples (Saddle
Finisher) ................................. 1-22
F. Removing Staple Jams
from the Saddle Stitcher Unit
(Saddle Finisher) .................... 1-23
G. Removing Paper Jams from
the Puncher Unit (option) ....... 1-25
H. Removing Punched Scrap
from the Puncher Unit
(option) ................................... 1-26
IV. MAINTENANCE BY THE
USER ........................................ 1-27
A. Maintenance by the User ....... 1-27
D. Job Offset ............................... 2-21
E. Stapling Operation ................. 2-24
F. Stapler Unit ............................ 2-32
G. Tray Operation ........................ 2-38
H. Detecting the Height of
Stack on the Tray .................... 2-40
I.
Shutter Operation ................... 2-42
J. Buffer Path Operation ............. 2-46
K. Detecting Jams ...................... 2-51
III. POWER SUPPLY SYSTEM ....... 2-56
iii
Advertisement
Table of Contents
Troubleshooting
