Removing The Paper Folding Roller - Sharp AR-FN8 Service Manual

CHAPTER 5 MECHANICAL CONSTRUCTION
Note:
When removing the saddle unit from the
finisher unit body, prevent the timing belt [8]
from catching on the communications cable
bracket [9].
2. Removing the Paper Folding
Roller
1) Remove the front lower door assembly. (See
II-A-1.)
2) Remove the front inside cover. (See II-A-
3.)
3) Remove the upper delivery guide. (See II-
A-5.)
4) Remove the PCB cover. (See II-A-6.)
5) Disconnect the two connectors [1].
6) Disconnect two connectors [2], remove the
three screws [3], and take out the paper
pushing motor mount [4].
5-24
[9]
Figure 5-214
[1]
Figure 5-215
[2]
[3]
Figure 5-216
[8]
[4]
[2]