Supplying The Saddle Stitcher Unit With Staples (Saddle Finisher) - Sharp AR-FN8 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
E. Supplying the Saddle
Stitcher Unit with Staples
(Saddle Finisher)
If the host machine indicates the saddle
stitcher unit staple supply message, perform the
following to supply it with staples.
1) Open the front lower door.
Figure 1-330
2) Slide out the stitcher unit.
Figure 1-331
1-22
3) Pull the stitcher unit to the front once and
then shift it up.
Figure 1-332
4) Hold the empty cartridge on its sides and
remove it.
Figure 1-333
5) Set a new cartridge.
Figure 1-334
Reference
You must always replace both cartridges at the
same time.