Staple Section - Sharp AR-FN8 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
c.

Staple section

Type
Staple load system
Installation
Fixing
Stapling capacity
Stapling direction
Basic functions Auto stapling
Staple empty detection
Applicable paper Size
Weight
Kinds
1-4
Unit assembly type
Staple cartridge (5,000 staples)
Inside of the front cover
Magnet catch
(A4 short, B5 short, LT short): 50 sheets
(A3 long, B4 long, A4 long, LD long, LT long, FOLIO,
COMPUTER): 30 sheets
Face-up stapling
Stapling is automatically performed for every number of
sheets specified in the staple sort mode.
Staple empty in the staple cartridge is automatically detected
by the photo sensor.
* One-point staple in the front
A3 long, B4 long, A4 (long/short), B5 short, LD long, LG
long, LT (long/short), FOLIO, COMPUTER
* One-point staple at that back
A4 long, LG long, LT long, COMPUTER
* One-point staple at the back (Slant staple)
A3 long, B4 long, A4 short, B5 short, LD long, LT short
* Two-point staple
A3 long, B4 long, A4 (long/short), ‚a5 short, LD long, LT
(long/short), COMPUTER, LG long, FOLIO
2
64 - 80g/m
Normal paper, recycled paper