I.
BASIC OPERATION
A.
Outline
The finisher is designed to deliver copies arriving from its host machine, and its modes of
delivery include simple stacking, job offset
All operations involved in these modes are controlled by the finisher controller PCB, according
to the appropriate commands from the host machine.
In the case of the Saddle Finisher, copies from the host machine may be routed to the saddle
stitcher unit.
Note:
The term job offset refers to shifting each sorting job, separating a single stack into several stacks.
CHAPTER 2 FINISHER UNIT BASIC OPERATION
(Note)
, and stapling.
Swing guide drive system
Alignment drive system
Stapler drive system
Delivery drive system
Feeder drive system
Shutter drive system
Tray drive system
Saddle stitcher unit control system
(Saddle Finisher)
Figure 2-101
2-1