Removing Staple Jams From The Saddle Stitcher Unit (Saddle Finisher) - Sharp AR-FN8 Service Manual

6) Pull the stitcher to the front once and then
return it to its original position.
Figure 1-335
7) Push in the stitcher unit and close the front
door.
Figure 1-336
CHAPTER 1 GENERAL DESCRIPTION
F. Removing Staple Jams
from the Saddle Stitcher
Unit (Saddle Finisher)
If the host machine indicates the saddle
stitcher unit staple jam message, perform the fol-
lowing to remove the jam.
1) Open the front lower door.
Figure 1-337
2) Slide out the stitcher unit.
Figure 1-338
3) Pull the stapler of the stitcher unit to the front
once and then shift it up.
Figure 1-339
1-23