Checking For A Jam - Sharp AR-FN8 Service Manual

CHAPTER 3 SADDLE STITCHER UNIT BASIC OPERATION
VI. CHECKING FOR A JAM
1.

Checking for a Jam

The saddle stitcher unit identifies any of the following conditions as a jam, and sends the jam
signal to the host machine. In response, the host machine may stop the copying operation and
indicate the presence of a jam on its control panel.
3-40
Figure 3-601
No.
PI11S Delivery sensor
PI14S Paper pushing plate home position sensor
PI15S Paper pushing plate top position sensor
PI17S Vertical path paper sensor
PI18S No.1 paper sensor
PI19S No.2 paper sensor
PI20S No.3 paper sensor
PI8S Paper positioning plate paper sensor
Table 3-601
PI18S
PI19S
PI20S
PI7S
PI11S
PI15S
PI14S
PI8S
Sensor