Removing The Saddle Unit - Sharp AR-FN8 Service Manual

CHAPTER 5 MECHANICAL CONSTRUCTION
B. SADDLE UNIT
1.

Removing the Saddle Unit

1) Remove the grate-shaped lower guide. (See
I-A-7.)
2) Remove the right guide assembly. (See I-
A-8.)
3) Remove the front lower door assembly. (See
II-A-1.)
4) Remove the rear lower cover. (See II-A-2.)
5) Remove the front inside cover. (See II-A-
3.)
6) Remove the saddle delivery tray assembly.
(See II-A-4.)
7) Remove the upper delivery guide. (See II-
A-5.)
8) Remove the PCB cover. (See II-A-6.)
9) Disconnect two connectors [1] and remove
the two screws [2].
10) Remove harness stop [3] and the harness
lead [4].
5-22
Figure 5-210
[3]
Figure 5-211
[1]
[2]
[4]