Receiving Sheets - Sharp AR-FN8 Service Manual

1.

Receiving Sheets

The stitcher unit receives sheets from the finisher unit and outputs them inside the vertical path
in vertical orientation.
The vertical path while sheets are being output is configured by two paper deflecting plates.
The position of the sheets being output is set by the paper positioning plate so that the center of
the stack matches the stapling/folding position.
Sheets coming later are output closer to the delivery slot, and the volume of paper that may be
output is as follows:
15 sheets (maximum of 14 sheets of 80 g/m
CHAPTER 3 SADDLE STITCHER UNIT BASIC OPERATION
2
+ 1 sheet of 200 g/m
Direction of
delivery
2nd sheet
Figure 3-202
2
)
1st sheet
Paper positioning plate
3-9