Finisher Specification; Basic Specifications; Tray Section - Sharp AR-FN8 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
II. SPECIFICATIONS
A. Finisher specifications
1.

Basic specifications

a. General
Type
Installation type
Fixing method
Vertical adjustment feature
Distribution system
Paper entry port height
b.

Tray section

(1) Functions (Mode)
Simple load (Non-sort)
Job offset load (Sort/Group)
Staple load
Mixed load Size mixed load
Staple mixed load
(2) Applicable paper
Size and load height [mm]
Weight
Kinds
Curl level
Stacking size
*1: Paper sizes and load height are shown below.
1-2
2-tray finisher * Stretching paper exit tray
Floor installation, field option
Latch method (Fixed with brackets in the upper side of the PPC exit
side)
Available
Tray shift system
683.5mm from the floor surface
Paper sheets of a same size are loaded in the specified bin in
the non-sort mode.
Discharged paper bundles are shifted back and forth to sort.
Stapling is automatically performed.
Paper sheets of different sizes are loaded in the specified bin.
(In the sort/group mode, only sheets of a same width can be
loaded.)
Paper sheets of different sizes (of a same width) are stapled
and loaded in a same bundle in the staple mode.
*1
Normal paper: 60 - 200g/m
Normal paper, recycled paper
Special paper: Conforming to the body specifications.
10mm or less
AB : A3, A4, A4-R, A5-R, B4, B5, B5-R
Inch : LD, LG, LT, LT-R, FOLIO, COMPUTER
2