Keyboard And Feature Interface; Connector - Kontron MOPS/386A User Manual

KEYBOARD AND FEATURE INTERFACE

10.
The keyboard and feature connector of the MOPS/386A offers five functions. The interface
connects the following:
System keyboard
Keyboard lock switch
Speaker
Battery
Reset button

Connector

10.1
The keyboard and feature connector is available through Connector X4 (10 pins).
An adapter cable is required to connect a standard keyboard to this interface. There are two
adapter cables available from Kontron:
AT-keyboard (KAB-KB-1, Part Number 96023-0000-00-0)
PS/2-keyboard (KAB-KB-PS2, Part Number 96060-0000-00-0)
The adapter cables do not know the other's functions on this interface.
The following table shows the pinout as well as necessary connections for adapters.
Header
1 2
9 10
To find the location of the keyboard and feature connector on the MOPS/386A board,
please see the Appendix E: Connector Layout chapter.
Keyboard and Feature Interface
Pin Signal Name
1 Speaker
2 GND
3 /RESIN
4 /KBLOCK
5 KBDAT
6 KBCLK
7 GND
8 VCC
9 BATT Battery in (3,6V)
10 PWRGOOD
18
Function 5-pin Din
(Diode)
Speaker output
Ground
Reset input
Keyboard lock
Keyboard data 2
Keyboard clock 1
Ground 4
+5V 5
Powergood
Kontron
6-pin MiniDin
(PS2)
1
5
3
4
MOPS/386A User's Guide