Table of Contents
Advertisement
Setup Guide
21.2
The Phoenix BIOS Setup Utility changes system behavior by modifying the BIOS
configuration. The setup program uses a number of menus to make changes and turn
features on or off.
The BIOS setup menus documented in this section represent those found in most models of
the MOPS/386A. The BIOS setup for specific models can differ slightly.
Note: Selecting incorrect values may cause system boot failure. Load setup-default
values to recover by pressing <F9>.
Start Phoenix BIOS Setup Utility
21.2.1.
To start the Phoenix BIOS Setup Utility, press the <F2> key when the following string
appears during boot up.
Press <F2> to enter Setup
The Main Menu then appears.
General Information
21.2.2.
The Setup Screen is composed of several sections:
Setup Screen
Menu Bar
Legend Bar
Item Specific Help Window
Menu Window
General Help Window
Menu Bar
The menu bar at the top of the window lists different menus. Use the left/right arrow keys
to make a selection.
Legend Bar
Use the keys listed in the legend bar on the bottom to make your selections or exit the
current menu. The table below describes the legend keys and their alternates.
BIOS Operation
Location
Top
Lists and selects all top-level
Bottom
Lists setup navigation keys.
Right
Left Center
Selection fields for current menu.
Overlay (center)
50
Function
menus.
Help for selected item.
Help for selected menu.
MOPS/386A User's Guide
Kontron
Advertisement
Table of Contents
