I/O Device Configuration Submenu - Kontron MOPS/386A User Manual

I/O Device Configuration Submenu

21.5.4.
Feature
Hard disk controller
Floppy disk
controller
Serial Port A
Serial Port B
Base I/O address
Interrupt
Parallel Port
Mode
Base I/O address
IRQ
DMA
8Watchdog
Settings
Keyboard Matrix
Note: In the Option column, bold shows default settings.
BIOS Operation
Option
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled Enabled requires a base I/O address and IRQ.
Auto Auto makes BIOS configure the port.
3F8h
2F8h
3E8h
2E8h
IRQ 3
IRQ 4
Disabled
Enabled Enabled requires a base I/O address and IRQ.
Auto Auto makes the BIOS configure the port.
Output only
Bi-directional
ECP
EPP
378h Select I/O base of parallel port. 3BCh cannot be
278h
3BCh
IRQ 5
IRQ 7
DMA3 DMA Channel 3 can be used for ECP mode only.
Submenu Opens Watchdog Settings submenu.
Disabled Enables the onboard keyboard matrix controller.
Enabled
58
Description
Enables onboard IDE controller.
Enables onboard FDC controller.
Disabled turns off port.
Select I/O base of serial port.
Select IRQ of serial port.
Disabled turns off port.
Set the mode for the parallel port.
selected in EPP mode.
Select the IRQ of parallel port.
MOPS/386A User's Guide
Kontron