Barg - Selecting The Bargraph Display; Msg.lo - -Lo Message Display; Msg.hi - -Hi Message Display - gefran 650 L Installation And Instruction Manual

4. CONFIGURATION

4.12.1. bArG - Selecting the bargraph display

Acronym
bArG BARGRAPH FUNCTION
The parameter displays and sets the view associated with the bar graph.
The parameter only appears if the indicator is 1250 L.
Unit of measurement:
Options:
to

4.12.2. MSG.LO - -Lo message display

Acronym
MSG.LO NUM SCROLLING MSG WHEN MAIN INPUT IS LOW ERR
The parameter shows and sets the number of the message assigned to -Lo (process variable < minimum scale limit), i.e.,
the scrolling message shown on the display.
For more information on scrolling messages, see paragraph "3.1.2.2. Scrolling messages" on page 24.
If the parameter is set to "0" no message will be displayed for -Lo.
As default, MSG.LO is assigned the message "1" (for LANG1 corresponds to "PROCESS VALUE UNDER LOW LIMIT",
for LANG2 corresponds to "PV AL MINIMO").
Unit of measurement:
Options: 0...25

4.12.3. MSG.HI - -Hi message display

Acronym
MSG.HI NUM SCROLLING MSG WHEN MAIN INPUT IS HI ERR
The parameter shows and sets the number of the message assigned to -Hi (process variable > maximum scale limit), i.e.,
the scrolling message shown on the display.
For more information on scrolling messages, see paragraph "3.1.2.2. Scrolling messages" on page 24.
If the parameter is set to "0" no message will be displayed for -Hi.
As default, MSG.HI is assigned the message "2" (for LANG1 corresponds to ""PROCESS VALUE OVER HIGH LIMIT", for
LANG2 corresponds to "PV SUPERIORE AL MASSIMO").
Unit of measurement:
Options: 0...25
Scrolling message
-
NONE = No indication (bar graph off)
AL1-PV = Deviation between AL1 and PV
The bar graph turns on from the left when the difference is less than 10% of the
maximum scale limit associated with the alarm. The bar graph will be fully on
when the % difference is less than or equal to zero of the maximum scale limit
associated with the alarm
Example:
With 1000 maximum alarm limit:
• the first mark on the bar graph will turn on when
AL1-PV<[10% di 1000] => AL1-PV<100
• the second mark on the bar graph will turn on when
AL1-PV<[9% di 1000] => AL1-PV<90
• ....
• ....
• the second to last mark on the bar graph will turn on when
AL1-PV<[1% di 1000] => AL1-PV<10
• the last mark on the bar graph will turn on when (AL1-PV) is less than or equal
Scrolling message
Message number
Scrolling message
Message number
80224_MHW_650 L - 1250 L_07-2018_ENG - 62
[0% di 1000] => (AL1-PV) less than or equal to 0
Submenu Attributes
HMI R W
Submenu Attributes
HMI R W
Submenu Attributes
HMI R W