Out3.S - Number Of Cycles Output 3; T.days - Total Working Days; P.days - Partial Working Days; T.int - Internal Temperature Of Indicator - gefran 650 L Installation And Instruction Manual

4.4.16. OUT3.S - Number of cycles output 3

Acronym
OUT3.S NUMBER X 1000 RELAY CYCLES
If output 3 is available on the indicator, the parameter shows the number of cycles (in thousands).
Unit of measurement:
Options: -

4.4.17. T.DAYS - Total working days

Acronym
T.DAYS TOTAL DAYS OF OPERATION
The parameter shows total number of working days of the indicator since first power-on. Each working day equals 24
hours of actual functioning.
Unit of measurement:
Options:

4.4.18. P.DAYS - Partial working days

Acronym
P.DAYS PARTIAL DAYS OF OPERATION
The parameter shows the number of working days of the indicator since the last counter reset, Each working day equals
24 hours of actual functioning.
The counter can be reset with the Us.cal function.
Unit of measurement:
Options:

4.4.19. T.INT - Internal temperature of indicator

Acronym
T.INT INTERNAL TEMPERATURE
The parameter shows the instantaneous internal temperature of the indicator.
Unit of measurement:
Options: -

4.4.20. T.MIN - Minimum internal temperature of the indicator

Acronym
T.MIN MIN INTERNAL TEMPERATURE
The parameter shows the minimum internal temperature of the indicator.
Unit of measurement:
Options: -
Scrolling message
Number (× 1000)
Scrolling message
Day
0...9999
Scrolling message
Day
0...9999
Scrolling message
°C
Scrolling message
°C
80224_MHW_650 L - 1250 L_07-2018_ENG - 37
4. CONFIGURATION
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R
Submenu Attributes
INFO R