Sw.ver - Software Version; Code - Serial Address Of The Indicator; Error - Primary Input Error; Sap.c - Sap Code - gefran 650 L Installation And Instruction Manual

4. CONFIGURATION
4.4.1.

SW.VER - Software Version

Acronym
SW.VER SOFTWARE VERSION
The parameter shows the version (major.minor) of the indicator software.
Unit of measurement: -
Options: -
4.4.2.

CODE - Serial address of the indicator

Acronym
CODE INSTRUMENT ID CODE FOR SERIAL COMM
The parameter shows identifying address of the device for serial communication.
Unit of measurement:
Options:
0...247
4.4.3.

ERROR - Primary input error

Acronym
ERROR MAIN INPUT ERROR
The parameter shows error detected by the main input.
Unit of measurement:
Options: nonE
-Lo
-Hi
Err
Sbr
4.4.4.

SAP.C - SAP code

Acronym
SAP.C SAP ORDER CODE
The parameter shows the product number (Fxxxxxx).
Unit of measurement:
Options:
4.4.5.

SEr.n - Serial address of the indicator

Acronym
SEr.n SERIAL NUMBER
The parameter shows the serial number of the indicator (number shown on data plate).
The serial number is displayed in the form yy.ww nnnn, where
yy = last two digits of year of production
ww = week of production
nnnn = progressive in week of production
Unit of measurement:
Options:
Scrolling message
Scrolling message
-
Scrolling message
-
= No error
= Process variable (PV) is below lower scale limit
= Process variable (PV) is above upper scale limit
= PT100 in short circuit or input values below lower limit
(for example, TC with incorrect connection)
= Sensor break or input values higher than upper limit
Scrolling message
-
-
Scrolling message
-
-
80224_MHW_650 L - 1250 L_07-2018_ENG - 34
Password Description
INFO R
Password Description
INFO R
Password Description
INFO R
Password Description
INFO R
Password Description
INFO R