Pasc0 - Setting Level 0 Password; Pasc1 - Setting Level 1 Password; Pasc2 - Setting Level 2 Password; Cfg - Entering The Reset Code - gefran 650 L Installation And Instruction Manual

4. CONFIGURATION
4.15. PASC0 – Setting level 0 password
Acronym
PASC0 SET PASS0
The parameter is used to set the password to access User Menu parameters.
Default code = 10
Unit of measurement:
Options: 0...9999

4.16. PASC1 - Setting level 1 password

Acronym
PASC1 SET PASS1
The parameter lets you set the password for accessing level 1 configuration submenus.
Default code = 1
Unit of measurement:
Options: 0...9999

4.17. PASC2 - Setting level 2 password

Acronym
PASC2 SET PASS2
The parameter lets you set the password for accessing level 2 configuration submenus.
Default code = 2
Unit of measurement:
Options: 0...9999
4.18. FI.CFG - Entering the reset code
Acronym
FI.CFG ENTER DEFAULT CONFIGURATION PASS
The parameter lets you set the code for resetting the indicator to factory configuration, which will delete all changes
made.
Default code: 99.
ATTENTION! After you have set code 99, when you press the
described in paragraph "3.2. Power-on sequence" on page 24."
Unit of measurement:
Options: 0...9999
Scrolling message
Number
Scrolling message
Number
Scrolling message
Number
Scrolling message
Number
80224_MHW_650 L - 1250 L_07-2018_ENG - 70
key the indicator runs the Power-on procedure, as
Submenu Attributes
Level 2 R W
Submenu Attributes
Level 2 R W
Submenu Attributes
Livello 2 R W
Submenu Attributes
Livello 2 R W