Jumpers (Jp1 To Jp12) - Renesas M3A-HS64 User Manual

7

7.2.1 Jumpers (JP1 to JP12)

The M3A-HS64G02 includes 12 jumpers. The following figure shows jumper assignments (JP1 to JP12) on the M3A-HS64G02.
The following table lists the jumpers setting for JP1, JP2, JP3, JP5, and JP9.
Table 7.2.1 Multi-function Pin Switch Jumpers Setting (JP1, JP2, JP3, JP5, and JP9)
Number Setting
JP1 1 - 2
2 - 3
SCL1/IRQ2
JP2 1 - 2
2 - 3
SDA1/IRQ3
JP3 1 - 2
PWM/
2 - 3
(SD/SSIF/PORT)
JP5 1 - 2
2 - 3
IETxD/CTx0
JP9 1 - 2
2 - 3
IERxD/CRx0
Rev. 1.00 Apr 30, 2009
REJ11J0034-0100
Figure 7.2.2 M3A-HS64G02 Jumper Assignments (JP1 to JP12)
Connects the D/A converter (U10) as the SCL1 output pin
Connects the push-button switch (SW1) as the IRQ2 input pin
Connects the D/A converter (U10) as the SDA1 I/O pin
Connects the push-button switch (SW2) as the IRQ3 input pin
Connects the MIL-spec connector (J5) as the PWM data output pin
Connects the SD card slot (J4), DAC (U10), and test pins (TP1 to TP4) as the SDHI, SSIF, and
PORT I/O pins
TM
Connects the IEBus driver (U37) as the IETxD output pin
Connects the CAN driver (U13) as the CTx0 output pin
TM
Connects the IEBus driver (U37) as the IERxD input pin
Connects the CAN driver (U13) as the CRx0 input pin
M3A-HS64G02 Operating Specifications
7.2.1 Jumpers (JP1 to JP12)
Description
7-26