RZ/A2M SUB Board RTK79210XXB00000BE
3.2.1
Jumpers (JP1 and JP2)
RTK79210XXB00000BE is equipped with two system setting jumpers.
Figure 3.2.2 shows the jumper layout diagram, and Table 3.2.1 shows the jumper setting table.
C side top view
Figure 3.2.2
RTK79210XXB00000BE Jumper Layout Diagram
Table 3.2.1
Jumper Setting Table (JP1 and JP2)
Jumper
Settings
JP1
IRQ0 input selection
[Note]
displayed during initial settings.
Be sure to turn off the power before altering the jumper settings.
R20UT4398EJ0100 Rev.1.00
2018.10.11
1-2
Ethernet PHY1 (U27) WOL pin
2-3
Ethernet PHY2 (U28) WOL pin
2-JP2
IRQ0 switch (SW3)
3. Operating specifications
JP2
1
3
JP1
Function
3-23