Renesas M3A-HS64 User Manual page 172

6
The following table lists the jumpers setting for JP3.
Number Setting
JP3
The following table lists the jumpers setting for JP4, JP6, JP7, JP8, JP10, and JP11.
Table 6.2.3 CAN Evaluation Jumpers Setting (JP4, JP6, JP7, JP8, JP10, and JP11)
Number Setting
JP4
Connects CTx1
JP8
Connects CRx1
JP6
Terminates CANL
(ch0)
JP7
Terminates CANH
(ch0)
JP10
Terminates CANL
(ch1)
JP11
Terminates CANH
(ch1)
The following table lists the jumpers setting for JP12.
Number Setting
JP12
PWRSEL
Notes:
1. The shaded row shows the default setting.
2. Do not change the jumper settings while the M3A-HS64G01 is ON. Be sure to turn the power OFF before changing the
settings.
Rev. 1.00 Apr 30, 2009
REJ11J0034-0100
Table 6.2.2 Plug-in Power Microphone Jumper Setting (JP3)
1 - 2
Supplies the power (Plug-in power microphone)
Open
Does not supply the power (Typical microphone)
1 - 2
Connects the CTx1 pin to the CAN driver (U16)
Open
Leaves the CTx1 pin disconnected to the CAN driver (U16)
1 - 2
Connects the CRx1 pin to the CAN driver (U16)
Open
Leaves the CRx1 pin disconnected to the CAN driver (U16)
1 - 2
Terminates the CANL (ch0) pin
Open
Leaves the CANL (ch0) pin not terminated
1 - 2
Terminates the CANH (ch0) pin
Open
Leaves the CANH (ch0) pin not terminated
1 - 2
Terminates the CANL (ch1) pin
Open
Leaves the CANL (ch1) pin not terminated
1 - 2
Terminates the CANH (ch1) pin
Open
Leaves the CANH (ch1) pin not terminated
Table 6.2.4 Power Supply Switch Jumper Setting (JP12)
1 - 2
Supplies the system power from J18
2 - 3
Supplies the system power from J19 (AC adapter is used)
M3A-HS64G01 Operating Specifications
6.2.1 Jumpers (JP2 to JP12)
Description
Description
Description
6-26