Sh7086 Power Supply Select Jumpers (Jp1) - Renesas Renasas Single-Chip Microcomputer SH7086 User Manual

3

3.2.1 SH7086 Power Supply Select Jumpers (JP1)

The JP1 allow the sources for the SH7086 power supply voltages to be selected.
Figure3.2.2 shows the SH7086 power supply voltage select jumper assignment (JP1). Table3.2.1 lists the jumper
setting for selecting SH7086 Power Supply Voltage (JP1).
Figure3.2.2 SH7086 Power Supply Voltage Select Jumpers Assignment (JP1)
Table3.2.1 Jumper Setting for Selecting SH7086 Power Supply Voltage (JP1)
Jumper Setting
JP1
PWRSEL
: Initial Setting
Note: Do not change jumper settings during the operation of M3A-HS86. Ensure to turn off the power for the
M3A-HS86 before changing jumper settings.
Rev.1.0 Feb 6, 2007
REJ10J0916-0100
Top View of the
Component Side
Board
Edge
1 - 2
5V fixed power supply voltage (supplied from J5)
2 - 3
External power supply voltage (supplied from J4)
3.2.1 SH7086 Power Supply Select Jumpers (JP1)
1
2
3
Board
Edge
Function
Operational Specifications
3-18