Jumpers (Jp1 To Jp15) - Renesas M3A-HS64 User Manual

5

5.2.1 Jumpers (JP1 to JP15)

The M3A-HS64 includes 15 jumpers.
The figure below shows jumper assignments (JP1 to JP15) on the M3A-HS64.
The following table lists jumpers settings (JP1 to JP3).
Number Setting
JP1
JP2
JP3
Notes:
1. The shaded row shows the default setting.
2. Do not change the jumper settings while the M3A-HS64 is ON. Be sure to turn the power OFF before changing the
settings.
Rev. 1.00 Apr 30, 2009
REJ11J0034-0100
Figure 5.2.2 M3A-HS64 Jumper Assignments (JP1 to JP15)
Table 5.2.1 Analog Power Supply Jumpers Setting (JP1 to JP3)
1 - 2
Supplies 3.3 V analog power for the A/D converter (AVcc)
Open
Does not supply 3.3 V analog power for the A/D converter (AVcc)
1 - 2
Supplies 3.3 V analog power for USB (USBAPVcc)
Open
Does not supply 3.3 V analog power for USB (USBAPVcc)
1 - 2
Supplies 1.2 V analog power for USB (USBAVcc)
Open
Does not supply 1.2 V analog power for USB (USBAVcc)
M3A-HS64 Operating Specifications
5.2.1 Jumpers (JP1 to JP15)
Description
5-17