Jumpers (Jp2 To Jp12) - Renesas M3A-HS64 User Manual

6

6.2.1 Jumpers (JP2 to JP12)

The M3A-HS64G01 includes 11 jumpers.
The following figure shows jumper assignments (JP2 to JP12) on the M3A-HS64G01.
The following table lists the jumpers setting for JP2, JP5, and JP9.
Table 6.2.1 Multiplexed Pin Switch Jumpers Setting (JP2, JP5, and JP9)
Number Setting
JP2
LCD/SD
JP5
IETxD/CTx0
JP9
IERxD/CRx0
Notes:
1. The shaded row shows the default setting.
2. Do not change the jumper settings while the M3A-HS64G01 is ON. Be sure to turn the power OFF before changing the
settings.
Rev. 1.00 Apr 30, 2009
REJ11J0034-0100
Figure 6.2.2 M3A-HS64G01 Jumper Assignments (JP2 to JP12)
1 - 2
Connects the character LCD connector (J1) as the LCD data output pin
2 - 3
Connects the SD card slot (J1) as the SDHI I/O pin
1 - 2
Connects the IEBus
2 - 3
Connects the CAN driver (U14) as the CTx0 output pin
1 - 2
Connects the IEBus
2 - 3
Connects the CAN driver (U14) as the CRx0 input pin
M3A-HS64G01 Operating Specifications
Description
TM
driver (U37) as the IETxD output pin
TM
driver (U37) as the IERxD input pin
6.2.1 Jumpers (JP2 to JP12)
6-25