Renesas M3A-HS64 User Manual page 144

5
Number
SW5-1 OFF
MD_CLK0 ON
SW5-2 OFF
MD_BOOT0
ON
SW5-3 OFF
MD_BOOT1
ON
SW5-4 OFF
SD_SEL ON
SW5-5 OFF
NAND_SEL ON
SW5-6 OFF
RSPI_SEL
ON
Note: The shaded row shows the default setting.
Number
SW6-1 OFF
NOR_WP#
ON
SW6-2 OFF
NAND_WP#
ON
SW6-3 OFF
SF_WP#
ON
SW6-4 OFF
E2P_WP
ON
SW6-5 OFF
PA2
ON
SW6-6 OFF
PA3
ON
Note: The shaded row shows the default setting.
The following table lists LEDs.
Number Color
LED1 Blue
LED2 Yellow
LED3 Yellow
Rev. 1.00 Apr 30, 2009
REJ11J0034-0100
Table 5.2.8 System setting DIP switches
Setting
MD_CLK0 = High
MD_CLK0 = Low
MD_BOOT0 = High
MD_BOOT0 = Low
MD_BOOT1 = High
MD_BOOT1 = Low
SD_SEL = High
SD_SEL = Low
NAND_SEL = High
NAND_SEL = Low
RSPI_SEL = High
RSPI_SEL = Low
Table 5.2.9 User DIP Switches
Setting
NOR_WP# = High
NOR_WP# = Low
NAND_WP# = High
NAND_WP# = Low
SF_WP# = High
SF_WP# = Low
EEPROM_WP = High
EEPROM_WP = Low
PA2 = High
PA2 = Low
PA3 = High
PA3 = Low
Table 5.2.10 LEDs
Power supply LED (LED1 is illuminated when 5 V power is supplied)
User LED (LED2 is illuminated when PA0/MD_BOOT1 outputs low)
User LED (LED3 is illuminated when PA1/MD_BOOT0 outputs low)
M3A-HS64 Operating Specifications
Description
Clock operating mode 3
Clock operating mode 2
Boot mode Boot options
0 NOR flash memory
1, 3 Serial flash memory
2 NAND flash memory
Connected to the SDRAM
Connected to the MTU2 interface
Connected to the NAND flash memory
Connected to the device which is connected to the RSPI
Connected to the serial flash memory
Connected to the expansion connector
(CD deck/RSPDIF/MTU2)
NOR flash memory is write-enabled
NOR flash memory is write-protected
NAND flash memory is write-enabled
NAND flash memory is write-protected
Serial flash memory is write-enabled
Serial flash memory is write-protected
EEPROM is write-protected
EEPROM is write-enabled
Description
5.2.2 Switches and LEDs
Description
5-20