Actuator Nameplate; Material Numbers; Label When An Adjustable Packing Is Installed; Optional Rfid Tag - Samson 3254 Mounting And Operating Instructions

Markings on the device
The nameplate (80) is affixed to the yoke of
the valve (see Fig. 2-2).
Fig. 2-2: Location of the nameplate

2.2 Actuator nameplate

See associated actuator documentation.

2.3 Material numbers

The seat and plug of the valves have an item
number written on them. You can contact us
stating this item number to find out which
material is used. Additionally, a seat code is
used to identify the trim material. This seat
code is specified on the nameplate.
2-2
80
2.4 Label when an adjustable
packing is installed
An instructional label is affixed to the valve
when an adjustable packing is installed (see
Fig. 2-3).
Fig. 2-3: Label when an adjustable packing is
installed

2.5 Optional RFID tag

The RFID tag is located directly next to the
nameplate on valves ordered with the RFID
tag option. It contains the same data as in-
cluded in the Data Matrix code on the elec-
tronic nameplate. It can be read using a
smartphone, tablet or RFID reader.
Application range according to the technical
data (see the 'Design and principle of opera-
tion' section).
EB 8060 EN