Siemens SINUMERIK 840D sl Function Manual page 1995

SD42940, 117, 119, 123, 142, 147, 149
SD42950, 116, 117, 120, 142, 147, 149
SD42960, 8, 120, 127, 128
SD42974, 97
Selection of the cutting edge when changing tool, 12
Slotting saw, 37
Smooth approach and retraction
Significance, 55
Sub-movements, 56
Storing angles in the toolholder data, 90
System parameters for toolholders with orientation
capability, 91
System variables for the user and for fine offsets, 92
T
T function, 11
Taking the compensation values into account location-
specifically and workpiecespecifically, 141, 169
TCARR, 102
TCOABS, 102
TCOFR, 102
TOA, 13
Tool, 11
Change, 11
Change tool with M06, 11
Cutting edge, 33
DISC, 70
Length compensation, 40
Length of cutting edge, 38
Radius compensation, 41
Select, 11
T function, 12
Tool base dimension/adapter dimension, 44
Tool cutting edge, 12
Tool radius compensation 2D (TRC), 49
Tool type, 35
Undercut angle, 46
Wear, 43
Tool change
D function, 12
Offset memory, 13
Tool compensation
Basic logic functions: Tool Offset (W1)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Calculation, 14
Tool compensation types, 89
Tool environments, 148
Tool length compensation, 40
Tool radius compensation
2D:approach and retraction behavior, 51
2D:collision detection, 75
2D:compensation at inside corners, 73
2D:compensation at outside corners, 69
2D:deselection, 69
2D:intersection G451, 71
2D:selection, 50
2D:smooth approach and retraction, 55
2D:transition circle, 70
2D:variable compensation value, 77, 100
Modified alarm response, 82
Tool radius compensation (TRC), 49
Tool type
Slotting saw, 37
TOOLENV, 149
Toolholder
With orientation capability, 87
Toolholder selection, 87
Toolholder with orientation capability, 8, 87, 165
Toolholder, with orientation capability
Control system response on Reset, program start,
REPOS, 110
Programming, 101, 105, 109, 166, 169
Supplementary conditions, 100, 105, 110
Toolholders with orientation capability with rotary
table, 166
Tools with a relevant tool point direction, 47
TOWBCS, 146
TOWKCS, 147
TOWMCS, 145
TOWSTD, 145
TOWTCS, 146
TOWWCS, 146
Z
Zero vectors, 93
Index
207