Table of Contents
Advertisement
Information about this manual
This manual explains the functions and the description of the parameters.
The information about mechanical installation, electrical connection and fast start-up can be found on the ADL300 Quick
start guide.
The whole set of manuals, included the expansions and field bus manuals, can be found
on Gefran web site
(https://www.gefran.com/en/products/416-adl300-lift-field-oriented-vector-inverter-for-synchronous-
asynchronousmotors#downloads).
Software version
This manual is updated according the
ADL300
software version
V 4.x.4 and EPC ver. 7.x.10.0.
Variation of the number replacing "X" have no influence on the functionality of the device.
The identification number of the software version is indicated on the identification plate of the drive or can be checked with the
Firmware ver.rel parameter - PAR 490, menu 2.5.
General Information
In industry, the terms "Inverter", "Regulator" and "Drive" are sometimes interchanged. In this document, the term "Drive" will be used.
Nota !
Before using the product, read the safety instruction section carefully (on Quick start manual).
Keep the manual in a safe place and available to engineering and installation personnel during the product functioning period.
Gefran Drives and Motion SRL
has the right to modify products, data and dimensions without notice. The data can only be used
for the product description and they can not be understood as legally stated properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improving this manual.
The e-mail address is the following: techdoc@gefran.com.
All rights reserved.
____________________ _
Page 2 of 64
ADL300-EPCv2- User Guide
Advertisement
Table of Contents
