Digilent Genesys ZU Reference Manual page 6

Analyzer assists with debugging logic that is running in hardware, and the HLS tool allows C code to be
directly compiled into HDL.
In the kit you will also find a free voucher for the Xilinx MIPI CSI‐2 IP cores. Follow the instructions on the
voucher slip to activate the license. This is a temporary measure until Vivado 2020.1 hits, which should
include a license for these IPs free of charge. See the next table for IP‐support status for other
peripherals.
Table I: IP support status
Feature/Peripheral
DDR4 memory
controller
MIPI CSI‐2/Pcam
DisplayPort controller PS hard‐core, WebPACK built‐in
Ethernet 1G
USB 2.0/3.0
PCIe Root/Mini PCIe
SATA/mSATA
On‐board Wi‐Fi/SPI
controller
SFP+*
HDMI 2.0 Source/Sink* PL soft‐core, HDMI Subsystem, license required
Video PHY Controller*
The initial Vivado version supported by Digilent for Genesys ZU‐related projects is 2019.1. Digilent
currently does not provide hardware platforms or examples for Xilinx's Vitis Unified Software Platform,
however Vitis support is planned for the near future.
Design resources, example projects, and tutorials are available for download at the Genesys ZU
Resource Center.
IP support
PS hard‐core, WebPACK built‐in
PL soft‐core, MIPI CSI Controller Subsystems, bundled voucher
PS hard‐core, WebPACK built‐in
PS hard‐core, WebPACK built‐in
PS hard‐core, WebPACK built‐in
PS hard‐core, WebPACK built‐in
PS hard‐core, WebPACK built‐in, open‐source Linux driver
PL soft‐core, 10G/25G Ethernet Subsystem, license required
PL soft‐core, WebPACK built‐in, requires protocol‐implementation like
the HDMI Subsystem above, supported by 5EV only
Version
2019.1
2019.1
2019.1
2019.1
2019.1
2019.1
2019.1
2019.1
2019.1
2019.1
2019.1