P1.2 Ext. Just.> (Aes Models) - KERN AEJ-C Series Operating Instruction

13.2.2 <P1.2 EXT. JUST.> (AES models)
• Carry out adjustment with the help of the recommended adjustment weight
(see chapter 1 "Technical Specifications").
• Observe stable environmental conditions. A warming up time (see chapter 1)
is required for stabilization.
• Invoke menu item < P1.2 EXT. JUST. >
• Ensure that there are no objects on the sample dish. Press the PRINT-key
and wait until the weighing value for the required adjustment weight is shown.
• Place the required adjustment weight carefully in the centre of the sample dish
and press the PRINT key. Wait until the "MASS REMOVAL" is shown.
• Take away adjustment weight. If the adjustment was successful, this will be
followed by automatic return to the menu.
AEJ-C/AES-C/PLJ-C-BA-e-1621 63