Set Tare Value; Send Stable Weighing Value In Standard Weighing Unit - KERN AEJ-C Series Operating Instruction

Unit:
- 3 characters left aligned
The tare value will always be shown in the adjustment unit.
29.6.4

Set tare value

˽
Command: UT TARA CR LF, (TARA = tare value)
Possible replies:
˽ Command executed
UT OK CR LF
˽
Command valid but cannot be executed at the moment
UT I CR LF
ES CR LF Invalid entry
Setting tare value:
• Mark decimal places with a point
• Without weighing unit
29.6.5

Send stable weighing value in standard weighing unit

Command: S CR LF
Possible replies:
Command accepted, command executing
˽
S A CR LF
˽
S E CR LF
Time limit for stabilisation of weighing balance display was exceeded
˽
Command valid but cannot be executed at the moment
S I CR LF
1 2-3 4
Stability
˽
S
sign*
160
5 6 7-15
˽
Signs Weight
AEJ-C/AES-C/PLJ-C-BA-e-1621
16 17-19 20
˽
Unit CR
21
LF