Start Continuous Output In Current Weighing Unit; Stop Continuous Output In Current Weighing Unit; Enter Lower Tolerance Limit; Enter Upper Tolerance Limit - KERN AEJ-C Series Operating Instruction

29.6.11 Start continuous output in current weighing unit

˽
Command: CU1
CR LF
Possible replies:
˽
CU1 I CR LF
˽
CU1 A CR LF
1 2 3 4
Stability
S U I
sign

29.6.12 Stop continuous output in current weighing unit

˽
Command: CU0
CR LF
Possible replies:
˽
CU0 I CR LF
˽
CU0 A CR LF

29.6.13 Enter lower tolerance limit

˽
Command: DH XXXXX CR LF
Possible replies:
˽
DH OK CR LF
ES CR LF

29.6.14 Enter upper tolerance limit

˽
Command: UH XXXXX CR LF
Possible replies:
˽
UH OK CR LF
ES CR LF
164
Command valid but cannot be executed at the moment
Command accepted, command executing
Weighing values are shown in current weighing unit
5 6
˽
Signs
Command valid but cannot be executed at the moment
Command accepted, command executing
Command executed
Syntax error (incorrect weight format)
Command executed
Syntax error (incorrect weight format)
7-15 16 17-19
˽
Weight Unit
AEJ-C/AES-C/PLJ-C-BA-e-1621
20 21
CR LF