Communication With External Devices (Printer / Pc); Pin Assignment Of Rs 232 Interface (Frontal View) - KERN AEJ-C Series Operating Instruction

29 Communication with external devices (printer / PC)

The following options are available for data exchange via the RS 232C interface or
USB with external devices.
 Manual
 Automatic
 Continuous
The following conditions must be met to provide successful communication between
the balance and the external devices.
Disconnect balance from the power supply and connect to the device interface
with a suitable cable. Faultless operation requires an adequate KERN
interface cable.
For communication parameters of the RS 232 interface (baud rate, bits and
parity) for the balance and the external device must match.

29.1 Pin assignment of RS 232 interface (frontal view):

Pin2 - RxD
Pin3 - TxD
Pin5 - GND
AEJ-C/AES-C/PLJ-C-BA-e-1621
- After printing the PRINT-key
- After the stability sign has appeared on the display
- When function is enabled or via remote control command
153