Table of Contents
Advertisement
4 Quick Start
Setting the Temperature
Press "EXIT" and the bath temperature will be displayed again.
E
Return to the temperature display
Bath temperature display
24.73 C
The bath will heat or cool until it reaches the new set-point temperature. Set the
heater switch to position "HIGH" to allow the bath to more quickly reach a
higher temperature. The "HIGH" setting may be necessary to reach higher tem-
peratures and control at high temperatures.
When setting the set-point temperature be careful not to exceed the temperature
limit of the bath fluid. The over-temperature cutout should be correctly set to
prevent this from happening. See Section 9.8.
To obtain optimum control stability adjust the proportional band as discussed in
Section 9.7.
15
Advertisement
Table of Contents
Need help?
Do you have a question about the 6020 Series and is the answer not in the manual?
Questions and answers