Standard Equipment; Declaration Of Conformity - Otto Bock 743L30-230 LaserLine Instructions For Use Manual

– Opening angle of the laser beams: 100°
– Upper laser can be turned by 225° (+45°, –180°), with angle scale for control of the rotation angle,
– 2° division.
– Lower laser with vertically projected line, can be horizontally turned by approx. ± 9°.
– Power supply: 4.8 V Accumulator Pack
– Connection thread W 1/4"
– Charger voltage 230 V/50-60 Hz or 110 V/60 Hz
10 Standard Equipment
The standard equipment consists of:
• LaserLine (1 pc.)
• Charger for 230 V/50-60 Hz or 110 V/60Hz (1 pc.)
• Transport box (1 pc.)
11 Accessories and Service Parts
625B4
743X30
12 Liability
The manufacturer's warranty applies only if the device has been used under the conditions and for
the purposes described. The manufacturer recommends that the device be used and maintained
according to the instructions for use.
13 Declaration of Conformity
Ottobock as manufacturer with sole responsibility declares that the 743L30 LaserLine conforms
to the requirements of Guideline 2004/108/EG + 2006/95/EG.
The design and construction of the apparatus were carried out in accordance with the following
Standards: EN 60825-1, EN 50081-1, EN 50082-2; EN 55011; EN 60335.
The conformity of the LaserLine is guaranteed.
7433300230/110 3aser3ine
Accumulator Pack
Stand
Ottobock | 15