Table of Contents
Advertisement
10 Communication
example, MMXU, GGIO, PIOC, etc.); a one or two-character instantiation index.
Complete names are of the form xxxxxxPTOC1, where the xxxxxx character string is configurable.
Details regarding the logical node naming rules are given in IEC61850 parts 6 and 7-2. It is
recommended that a consistent naming convention be used for an entire substation project.
10.4.5.5 GOOSE Services
IEC61850 specifies the type of broadcast data transfer services: Generic Object Oriented
Substation Events (GOOSE). IEC61850 GOOSE services provide virtual LAN (VLAN) support,
Ethernet priority tagging, and Ether-type Application ID configuration. The support for VLANs and
priority tagging allows for the optimization of Ethernet network traffic. GOOSE messages can be
given a higher priority than standard Ethernet traffic, and they can be separated onto specific
VLANs. Devices that transmit GOOSE messages also function as servers. Each GOOSE
publisher contains a "GOOSE control block" to configure and control the tran smission.
The GOOSE transmission (including subscribing and publishing) is controlled by GOOSE link
settings in device.
The PCS-9600 series relays support IEC61850 Generic Object Oriented Substation Event
(GOOSE) communication. All GOOSE messages contain IEC61850 data collected into a dataset.
It is this dataset that is transferred using GOOSE message services. The GOOSE related dataset
is configured in the CID file and it is recommended that the fixed GOOSE be used for
implementations that require GOOSE data transfer between the PCS-9600 series relays.
IEC61850 GOOSE messaging contains a number of configurable parameters, all of which must be
correct to achieve the successful transfer of data. It is critical that the configured datasets at the
transmission and reception devices are an exact match in terms of data structure, and that the
GOOSE addresses and name strings match exactly.
The general steps required for transmission configuration are:
1.
Configure the data.
2.
Configure the transmission dataset.
3.
Configure the GOOSE service settings.
The general steps required for reception configuration are:
1.
Configure the data.
2.
Configure the reception dataset.
3.
Configure the GOOSE service settings.
10.4.6 ACSI Conformance
10.4.6.1 ACSI Basic Conformance Statement
Client-Server Roles
10-16
Services
Date: 2014-04-08
Client
Server
PCS-9600 Series
PCS-9611 Feeder Relay
Advertisement
Chapters
Table of Contents
