Submenu Of "Test - NR Electric PCS-9611 Instruction Manual

8 Human Machine Interface
The first line shows the title of this interface, other lines show the information of the board
information, including the manufacturer abbreviation name, the device name, the device code, the
program version, the program CRC code and the program creation time.
NOTE! It is only an example for explaining the software version menu. The practical
software version of this relay should be taken as final and binding.
8.2.9.2 View Board Information
All the module information can be known through this menu.
Press key "▲" to enter the main menu in the default displaying situation.
1.
Press key "▲" or "▼" to locate the cursor on the submenu "Information" and press key "ENT"
2.
to enter this submenu.
Press key "▲" or "▼" to locate the cursor on the submenu "Board Info" and press key "ENT"
3.
to show the board information.
The board information interface is shown as below.
The first line shows the title of this interface, other lines show the informa tion of the board
information, including the slot sequence number, the module type, the module operation state and
the module configuration state. In normal operation situation, the module configuration state
should be same with the module operation state.

8.2.10 Submenu of "Test"

Purpose:
8-26
Version Info
NR
Feeder Relay
PCS-9611
Version
Program CRC
Program Time
Figure 8.2-17 LCD displa y of the software version
Board Info
NO Type
01 NR4106
02 NR4126
03 NR4521
06 NR4521
06 NR4501
08 NR4501
Figure 8.2-18 LCD displa y of the board information
Date: 2014-04-08
2.13.1.140115
FB824FE5
2014-04-01
20:40:02
Stat Conf
√ √
-- (--)
-- (--)
√ (√)
√ (√)
-- (--)
PCS-9611 Feeder Relay