Submenu Of "Measurements - NR Electric PCS-9611 Instruction Manual

The following figure shows the menu tree structure of this device.
Measurements
Measurements1
Measurements2
Status
Inputs
Outputs
Superv State
Records
Disturb Records
Superv Events
IO Events
Device Logs
Control Logs
Press key "▲", "▼", "◄" or "►" to select a submenu and the press key "ENT" to show the details.
NOTE! This manual introduces all the submenus and their functions which maybe can be
supplied by this relay. Some submenus are not configured if the relevant functions are
not supported in this relay. So the practical submenus of this relay should be taken as
final and binding.

8.2.3 Submenu of "Measurements"

Purpose:
This menu is used to view the measured values including current, voltage, phase angle and other
calculated quantities.
Access approach:
Move cursor to the item "Measurements" and press key "ENT" to enter its submenu after entering
the main menu of this device.
Submenu structure tree:
The submenu "Measurements" has following submenus.
PCS-9611 Feeder Relay
MainMenu
Settings
System_Settings
Prot Settings
BCU Settings
Logic Links
Device Setup
Print
Device Info
Settings
Disturb Records
Superv Events
IO Events
Device Status
Waveforms
IEC103 Info
Cancel_Print
Figure 8.2-3 Tree diagram of total command menu
Date: 2014-04-08
8 Human Machine Interface
Local Cmd
Reset Target
Trig Oscillograph
Download
Clear Counter
Clear Interlock File
Clear Energy Counter
Control
Information
Version Info
Board Info
Test
Device Test
AC Auto Calbr
Disturb Record Items
Clock
Language
8-5