Table of Contents
Advertisement
8 Human Machine Interface
Press key "▲" or "▼" to locate the cursor on the submenu "Device Test" and press key "ENT"
3.
to enter this submenu.
Press key "▲" or "▼" to locate the cursor on the submenu "Disturb Events" and press key
4.
"ENT" to enter this submenu.
Press key "▲" or "▼" to locate the cursor on the submenu "Select Test" and press key "ENT"
5.
to show all the protective elements.
Press key "▲" or "▼" to locate the cursor on a selected protective element and then press key
6.
"ENT" to create a binary signal.
NOTE! The submenu "All Test" is used to test all the binary signals automatically.
8.2.10.2 Communication Test of the Telemetering
Operating steps:
Press key "▲" to enter the main menu in the default displaying situation.
1.
Press key "▲" or "▼" to locate the cursor on the submenu "Test" and press key "ENT" to
2.
enter this submenu.
Press key "▲" or "▼" to locate the cursor on the submenu "Device Test" and press key "ENT"
3.
to enter this submenu.
Press key "▲" or "▼" to locate the cursor on the submenu "Measurements" and press key
4.
"ENT" to all the metering measurements.
Press key "▲" or "▼" to locate the cursor on a selected metering measurements and press
5.
key "+" or "-" to modify the selected metering value.
After finishing the modification, press key "ENT" to transmit the metering values.
6.
8.2.11 Submenu of "Clock"
Purpose:
This menu is used to modify the current time of this relay.
Access approach:
Move cursor to the item "Clock" and press key "ENT" to enter the clock modification interface after
entering the main menu of this device.
8.2.11.1 Clock Modification
Set the current time of this relay as following steps.
Operating steps:
Press key "▲" to enter the main menu in the default displaying situation.
1.
Press key "▲" or "▼" to locate the cursor on the submenu "Clock" and press key "ENT" to
2.
8-28
Date: 2014-04-08
PCS-9611 Feeder Relay
Advertisement
Chapters
Table of Contents
