Submenu Of "Print - NR Electric PCS-9611 Instruction Manual

8 Human Machine Interface
Press key "+" or "-" to select the expected setting group number and then press key "ENT" to
5.
show the password input interface.
Input the correct password and then press key "ENT" to copy the settings of the active group
6.
to the selected group.
8.2.6.4 Switch the Active Setting Group
There are two methods which are used to switch one setting group to another group. One method
is to modify the setting [Active_Grp] in submenu "System Settings". Another method is detailed
as following operating steps.
Operating steps:
Press key "GRP" to enter the setting group switch interface in the default displaying situation.
1.
Press key "+" or "-" to select the expected setting group number and then press key "ENT" to
2.
show the password input interface.
Input the correct password and then press key "ENT" to copy the settings of the active group
3.
to the selected group.

8.2.7 Submenu of "Print"

Purpose:
The menu is used to print the relevant information of this device. A printer is needed, and the
®
EPSON LQ-300K is recommended.
Access approach:
Move cursor to the item "Print" and press key "ENT" to enter its submenu after entering the main
menu of this device.
The submenu "Print" has following submenus.
No. Item
1 Device Info
2 Settings
3 Disturb Records
4 Superv Events
8-20
Change Active Group
Active Group:
Change to Group:
Figure 8.2-13 LCD displa y of the change of active group
To print the device description information
To print the settings of this device
To print the fault reports
To print the supervision alarm records
Date: 2014-04-08
01
02
Description
PCS-9611 Feeder Relay