Submenu Of "Local Cmd - NR Electric PCS-9611 Instruction Manual

8 Human Machine Interface
Press key "▲" or "▼" to locate the cursor on the submenu "Cancel Print" and press key
3.
"ENT" to cancel the present printing content. The information "Canceling Print..." is shown on
the LCD.

8.2.8 Submenu of "Local Cmd"

Purpose:
This menu is used to operate this device locally, such as signal resetting, triggering an
oscillograph, controlling circuit breaker, clearing history statistic counter etc.
Access approach:
Move cursor to the item "Local Cmd" and press key "ENT" to enter its submenu after entering the
main menu of this device.
Submenu structure tree:
The submenu "Local Cmd" maybe has following submenus.
No. Item
1 Reset Target
2 Trig Oscillograph
3 Download
4 Clear Counter
5 Clear Interlock File
6 Clear Energy Counter
7 Control
8.2.8.1 Reset Signals and Outputs
The submenu "Reset Target" is used to reset the signals and outputs.
Operating steps:
Press key "▲" to enter the main menu in the default displaying situation.
1.
Press key "▲" or "▼" to locate the cursor on the submenu "Local Cmd" and press key "ENT"
2.
to enter this submenu.
Press key "▲" or "▼" to locate the cursor on the submenu "Reset Target" and press key
3.
"ENT" to restore all the signals and relevant outputs of this relay.
8.2.8.2 Trigger an Oscillogram
The submenu "Trig Oscillogram" is used to trigger this relay to store a waveform.
Operating steps:
Press key "▲" to enter the main menu in the default displaying situation.
1.
Press key "▲" or "▼" to locate the cursor on the submenu "Local Cmd" and press key "ENT"
2.
to enter this submenu.
8-22
To restore all the signals on the LCD and binary outputs
To record present measurements as oscillogram
To enable the download function of this relay
To clear the statistic information of this relay
To delete the interlock configuration file of this relay
To clear the energy accumulation counter of this relay
To control the circuit breaker
Date: 2014-04-08
Description
PCS-9611 Feeder Relay