Submenu Of "Information - NR Electric PCS-9611 Instruction Manual

(stop)
Select the control check mode
NoCheck
SynchroCheck
DeadCheck
LoopCheck
EF Line Selection
Select the control interlock mode
InterlockChk
InterlockNotChk
Select the control type
Select
Execute
Cancel

8.2.9 Submenu of "Information"

Purpose:
This menu is used to view program version information and module information of this relay.
Access approach:
Move cursor to the item "Information" and press key "ENT" to enter its submenu after entering the
main menu of this device.
Submenu structure tree:
The submenu "Information" maybe has following submenus.
No. Item
1 Version Info
2 Board Info
8.2.9.1 View Software Version
The program version information of this relay can be known through this menu.
Operating steps:
Press key "▲" to enter the main menu in the default displaying situation.
1.
Press key "▲" or "▼" to locate the cursor on the submenu "Information" and press key "ENT"
2.
to enter this submenu.
Press key "▲" or "▼" to locate the cursor on the submenu "Version Info" and press key
3.
"ENT" to show the program version information.
Press key "▲" or "▼" to show all the version information of the main program and the HMI
4.
program.
The software version information interface is shown as below.
PCS-9611 Feeder Relay
Stop current operation, not supported in this relay.
Select the non-check mode
Select the synchronism check mode
Select the dead check mode
Select the loop check mode, not supported in this relay.
Select the grounding trip check mode, not supported in this relay.
Select the interlock check mode
Select the non-interlock check mode
control selection
control execution
control cancellation
To view the program version information of this relay
To view the module information of this relay
Date: 2014-04-08
8 Human Machine Interface
Description
8-25