CP Autosport SetupWizzard Operating Manual page 60

Contents
11 Service
11.1 Safety measures when carrying out service
Heed the following points before doing service work:
Cordon off access to the measuring system's work area. Make sure that no
–
unauthorized persons are in the measuring system's work area.
–
Make sure that all system components have cooled down to the ambient temperature.
–
Make sure that suitable hoists and lifting accessories are available if larger parts (flight
case) need to be replaced.
–
Make sure you do not bend your back when working on parts fitted at a low level; always
crouch. Make sure you are standing upright and your back is straight when working on
parts fitted at a high level.
–
Replace any imperfect parts immediately.
–
Use original spare parts only.
Carry out the following activities after maintenance and before starting up the measuring
system:
–
Check that all previously released screw connections have been retightened properly.
–
Make sure that all previously removed safety devices and guards have been refitted.
–
Make sure that all tools, materials and other equipment have been removed from the
work area.
–
Clean up the work area. Remove any leaked liquids and similar substances.
Make sure that all the measuring system's safety devices are functioning correctly.
–
Wheel alignment system SetupWizzard
55