Safety During Transport - CP Autosport SetupWizzard Operating Manual

Contents
5 Transport and storage (by plant operator)
Transport between the points of deployment is carried out by the plant operator or by
companies authorized by the plant operator. The measuring system is transported in the
flight case (CP Tech GmbH) or in containers provided by the plant operator.
The transport regulations of CP Tech GmbH must be adhered to.
•
Use and heed the pictograms on the packaging:
Top
5.1

Safety during transport

Observe the following safety information when transporting the measuring system or
components:
–
When transporting by sea, protect the measuring system from sea air and water
(seaworthy packaging).
–
When transporting by air, pay attention to the LiPo accumulators in the netbook.
–
The measuring system or components are only allowed to be transported by suitably
qualified and instructed personnel in compliance with all safety information.
–
When choosing suitable lifting equipment and load handling attachments, always take
the weight of the heaviest component into consideration (for weights, see „3.3.5
Transport box (flight case)")
–
Wear protective clothing, safety shoes, and safety gloves when working.
–
Make sure that nobody is in the transport route.
–
Only lift the measuring system/component at the intended points.
–
Always lift the measuring system slowly and carefully.
Wheel alignment system SetupWizzard
Breakable Protect against
goods moisture
Protect against Do not stack
heat
23