CP Autosport SetupWizzard Operating Manual page 15

2.4 Safety measures for environment protection
In all work obey the regulations for waste avoidance and proper waste disposal/recycling.
In the course of installation, maintenance and decommissioning, in particular, it must be
ensured that materials which could jeopardize the groundwater – such as greases, oils,
coolants, solvent-containing cleaning fluids and the like – do not pollute the ground or get
into the drains. These materials must be caught, kept and transported in suitable containers
and disposed of in compliance with national regulations.
2.5 Special hazard signs
2.5.1 Symbols used on the measuring system
Keep all safety and hazard signs on the measuring system in a legible state. Renew
the signs if necessary.
10
Fatal injury hazard due to electricity
This symbol warns of fatal injury hazard due to electricity.
Contact with live parts is a direct fatal injury hazard.
Warning of hot surface
This symbol warns of a burn hazard due to hot surfaces.
Warning of hand injury
This symbol warns of hand injuries when setting up the measuring system.
Warning of laser beams
This symbol warns of laser beams (leveling laser, toe laser, positioning laser).
Warning of obstacles on the ground
This symbol warns of obstacles on the ground (cables, tools, ...).
Contents
CP Tech GmbH