Intended Use - CP Autosport SetupWizzard Operating Manual

2 Safety
Failure to observe the safety information below may have serious
consequences:
–
Risk to persons due to electrical, mechanical or chemical effects
–
Failure of important functions
–
Environmental damage due to leaking hazardous substances
Read the safety and hazard information in this section thoroughly before putting
the measuring system into operation.
In addition to the information specified in this operating manual, always comply with
general safety and accident prevention regulations.
Follow internal rules and regulations.
In addition to the information specified in this operating manual, the plant
operator/system operator must comply with national occupational, health and
safety regulations.
2.1

Intended use

The safety of the measuring system is only ensured if it is used as intended.
The measuring system is only intended for the measurement of vehicle suspension.
The measuring system is not intended for use other than as described here; other use
counts as inappropriate. In addition, the measuring system is only approved for vehicles
with a total vehicle weight of up to 2000kg or 500kg/wheel.
Intended use also includes:
–
Observing all information from the operating manual
–
Complying with the inspection and maintenance intervals
–
Complying with the operating conditions
The technical specifications mentioned in the technical data must be complied with without
exception.
Only use the measuring system as intended; otherwise there is no guarantee of
safe and reliable operation.
It is not the manufacturer but the plant operator who is responsible for any and all
personal injuries and material damage resulting from unintended use.
6
Contents
CP Tech GmbH