Setting Up The Software - CP Autosport SetupWizzard Operating Manual

Contents
7.3

Setting up the software

The SetupWizzard software is already preinstalled on the supplied netbook (may differ from
the picture above). Start the program by clicking the desktop shortcut. The data transmitted
by the measuring platforms via radio are processed and visualized by the software.
At the time of delivery, the four measuring platforms are already connected to the netbook
and configured in the PC software. A measurement can thus be started immediately by
pressing the „Start" button.
The SetupWizzard software offers the following application options:
–
Suspension measurement
•
Camber measurement
•
Wheel load distribution measurement
•
Caster measurement (optional)
–
Camber sensor (inclinometer) adjustment
–
Taring the wheel load scales
–
Management of several vehicles
–
Management of several SetupWizzard measuring systems
If you would like to install the software on another device, you will find it on the USB stick
in the leather case of the flight case. Simply copy the software from this USB stick to the
desktop of the computer. The SetupWizzard software does not require a conventional
installation, so it can be started directly from the program folder by double-clicking on the
SetupWizzard icon. For a better order of the computer, we recommend copying the folder
of the SetupWizzard software into the program folder and creating a desktop shortcut.
Wheel alignment system SetupWizzard
31