General Safety Information - CP Autosport SetupWizzard Operating Manual

Contents
2.2.4 Instruction
The plant operator must instruct personnel at regular intervals. Keep a record of all
instructions given in order to keep track of matters.
Date
2.3

General safety information

–
Always read and understand the operating manual before operating and maintaining
the measuring system.
–
Only
(see „2.1 Intended use").
–
Do not work on the measuring system when other persons are present in the danger
zone.
–
Refrain from any act which is likely to compromise the health and safety of people and
safe operation of the measuring system.
–
Never operate the measuring system without the associated guards and safety devices.
Never take installed safety devices out of operation.
–
Always keep the work area around the measuring system clean and tidy to prevent
hazards due to dirt and things lying around.
Do not exceed the technical data (see „3.3 Technical data").
–
–
Keep all safety and hazard signs on the measuring system in a legible state and renew
them if necessary.
–
Only qualified or trained personnel are allowed to operate or work on the measuring
system (see „2.2 Personnel requirements").
–
Take the measuring system out of operation immediately if a fault occurs. Have faults
rectified by appropriately trained specialists or by CP Tech GmbH.
Always keep the operating manual at the measuring system's point of deployment. It
–
must be ensured that all personnel working on the measuring system can view the
operating manual at any time.
Wheel alignment system SetupWizzard
Type of
Name
instruction
use the measuring
Instruction given
by
system for its
Signature
intended purpose
9